FHA Streamline 203k Rehab Loans – What Can I Do

The Streamlined (k) program may be used for the financing of REO purchases where a pre-1978 property has been determined to contain lead-based paint and the M&M Contractor has completed a stabilization plan and cost estimate to stabilize (mitigate) the deteriorated paint.  The purchaser must sign a 203(k) rehabilitation financing lead agreement requiring that a clearance examination and report be included in the work write-up and conducted before release of the final construction disbursement and before occupancy.  The credit from HUD, received at sales closing by the purchaser, associated with the lead-based paint stabilization plan is not included in the $35,000 Streamlined (k) limit.  The Streamlined (k) program may beused for all eligible repair items as shown above, including the cost of lead-based paint stabilization not paid for by HUD when it sells a property requiring lead-based paint stabilization. A state- or Environmental Protection Agency (EPA) certified lead-based paint inspector, certified risk assessor or sampling technician, must perform the clearance examination.When the Department sells a single-family REO property, the M&M Contractor determines whether repairs are necessary to stabilize any lead-based paint.  HUD’s regulations for pre-1978 housing require the stabilization of paint except for paint determined not to be lead-based paint.  HUD may reduce the sales  price by the amount of a credit equal to the Department’s contribution toward the cost of lead-based paint stabilization.  Any lead-based paint stabilization costs in excess of this credit become the responsibility of the purchaser.

Can the Streamlined (k) program be used for refinancing the mortgage?

The Streamlined (k) program is also available for mortgage refinance transactions including those where the property is owned free-and clear. Only credit-qualifying “no cash out” refinance transactions with an appraisal are eligible for the Streamlined (k) program.  The form HUD-92700 provides instructions for calculating the maximum mortgage permitted for Streamlined (k) loans for purchase and refinance transactions.

If the borrower has owned the property for less than a year, the acquisition cost must be used to determine the maximum mortgage amount. The requirement to use the lowest sales price within the last year does not apply to the Streamlined (k) program.

Appraisal requirements under the Streamlined (k) program?

The Streamlined (k) program may be used for discretionary repairs and/or improvements that may not have been identified in the course of a pre-purchase inspection or appraisal.  The mortgagee must provide the appraiser with information regarding the proposed rehabilitation or improvements and all cost estimates so that an after-improved value can be estimated.  A description of the proposed repairs and/or improvement must be included in the appraisal report as well as the contractor’s cost estimate.  The appraiser is to indicate in the reconciliation section of the appraisal report an after-improved value subject to completion of the proposed repairs and/or improvements.

What are the mortgagee’s requirements for examining the contractor bids? For paying the contractor prior to beginning construction? For inspections of the work?

• Contractor bids:  While mortgagees are not contractors, participation in this program requires that they examine the contractor’s bid(s) and determine that they fall within the usual and customary range for similar work.  Mortgagees must also ensure that the selected contractor(s) meet all jurisdictional licensing and
• bonding requirements.
• Payments in advance of construction:  The mortgagee-at its discretion-may provide the contractor with up to 50 percent of the estimated cost of any work item prior to beginning construction.  Such payments should only be made where the mortgagee is satisfied with the reputation of the contractor(s) and the contractor is not willing or able to defer receipt of payment until completion of the work or the payment represents the cost of materials incurred prior to construction.
• Payments for Inspections:
  • For repair costs not exceeding $15,000, the mortgagee is not required to perform, or have others perform, inspections of the completed work. However, the mortgagee may choose to obtain or perform inspections if it believes such actions are necessary for program compliance and/or risk mitigation.  Mortgagees may also ensure that the repairs and/or improvements have been completed by obtaining contractor’s receipts or by a signed Mortgagor’s Letter of Completion.  If the mortgagee determines that an inspection(s) by a third party is necessary to ensure proper completion of the proposed repair or improvement item, the mortgagee may charge the borrower for the costs of no more than two inspections per each contractor.
  • For repairs in excess of $15,000, the mortgagee must perform or obtain an inspection of the completed work by a third party.

What are the mortgagor’s requirements for selecting the contractor? And what are the mortgagee’s requirements for review of the contractor and the rehabilitation proposal?

The mortgagor must use one or more contractors to complete the repairs.  “Self-help” arrangements, in which the mortgagor performs the work, are not to be approved unless the mortgagor can sufficiently demonstrate that he or she has the necessary expertise and experience to perform the work competently (e.g., mortgagor is an electrician and will perform electrical repairs/upgrades to the property).

The mortgagor will select the contractor(s) who will provide estimates for work to be done.  The mortgagee reviews the mortgagor’s proposed work plan and cost estimates to ensure the planned work meets all program and repair recommendations as noted on the appraisal report.  The mortgagor must provide the mortgagee with a written cost estimate(s) and references from a duly licensed and bonded contractor(s) for each specialized repair or improvement.  If “self-help” arrangements are utilized, the mortgagor must provide written estimates from the suppliers of the materials.  Those repairs and improvements must meet any local codes and ordinances and the mortgagor and/or contractor must obtain all required permits prior to the commencement of work.

The cost estimate(s) must clearly state the nature and type of repair and the cost for completion of the work item and must be made even if the mortgagor is performing some or all of the work under a self-help arrangement.  The mortgagee must review the contractor’s credentials, work experience and client references and may require the mortgagor to provide additional cost estimates if necessary.  After review, the selected contractor(s) must agree in writing to complete the work for the amount of the cost estimate and within the allotted time frame.

A copy of the contractor’s cost estimate(s) and the Homeowner/Contractor Agreement(s) must be placed in the insuring binder.  The contractor must finish the work in accordance with the written estimate and Homeowner/Contractor Agreement and any approved change order.  As in the regular 203(k) program, the Rehabilitation Construction Period begins when the mortgage loan is closed.

What are the mortgagee’s requirements for paying contractors?

No more than two payments may be made to each contractor, or to the mortgagor if the mortgagor is performing the work under a self-help arrangement.  The first payment is intended to defray material costs

and shall not be more than 50% of the estimated costs of all repairs/improvements.  When permits are required, those fees may be reimbursed to the contractor at closing.  The final payment to the contractor will be made following completion of all work and release of any and all liens arising out of the contract or submission of receipts or other evidence of payment covering all subcontractors or suppliers who could file a legal claim.  When necessary, the mortgagee may arrange a payment schedule, not to exceed two (2) releases, per specialized contractor (an initial release plus a final release.)  Mortgagees are to issue payments solely to the contractor, except if the mortgagor is performing the work under a self-help arrangement, in which case the mortgagor may be reimbursed for materials purchased in accordance with the previously obtained estimates; the mortgagor may not be compensated for his or her labor.

To eliminate the need and cost for an inspection of the completed repair(s) or improvement(s) when not exceeding $15,000, the mortgagee may accept receipts or proof of completion of the work to the homeowner’s satisfaction from the contractor.  Before a final release is made, the mortgagor must sign a statement acknowledging that the work has been completed in a professional and satisfactory manner.

May the mortgagee establish a Contingency Reserve?

The Streamlined (k) program does not mandate a contingency reserve be established.  However, at the mortgagee’s discretion a contingency reserve account may be set up for administering the loan.  Funds held back in contingency reserve must be used solely to pay for the proposed repairs or improvements and any unforeseen items related to these repair items.  Any unspent funds remaining after the final work item payment(s) is made, must be applied to the mortgage principal.

Is there a maximum mortgage amount worksheet that must be used?

Form HUD-92700, 203(k) Maximum Mortgage Worksheet must be used to calculate the mortgage amount.  Also, the appraiser must provide an after-improved value since 110% of that amount is used in calculating the maximum mortgage.  Architectural and consultant fees, line items 6 and 7 of Section B of the worksheet are not applicable to the Streamlined (k) program.  For Item 3 of Section D, please refer to handbook HUD-4155.1 REV-5, paragraph 1-7 which provides the various maximum loan-to-value ratios.

Expenses that may be included in the total amount of the improvements, not to exceed the $35,000 limit, are inspection fees, building and other permits, the supplemental origination fee, title update costs and the amount of any contingency reserve required by the mortgagee.

Are there specific data entry requirements under the Streamlined (k) program?

The mortgagee must enter “203KS” in the 203(k) Consultant ID field in the Case Number Assignment Screen (and the Insurance Application Screen) to identify the Streamlined (k) product and enter the amount of the repairs in the Repair Escrow Amount field in the Insurance Application Screen.  In the event that the mortgagee had originally begun processing the case as a purchase mortgage without repairs, the mortgagee should update the existing case data in the Case Number Assignment screen, changing the ADP Code to a valid 203(k) ADP Code and the Construction Code to Substantial Rehabilitation.

If the Streamlined (k) mortgage is for a refinance transaction, please enter “substantial rehabilitation” in the drop down screen labeled “Construction Code” and “Not Streamlined” (the refinance type) in the drop down screen labeled “All Refinances” in the Case Number Assignment Screen in FHA Connection.

Nonprofits
In addition, mortgagees are reminded that nonprofit purchasers of multiple HUD Homes using the Streamlined (k) program must comply with the approval and financing requirements described in Mortgagee Letter 00-8.